ParexGroup, a French multinational company with headquarters in Paris, France. ParexGroup is a global leader in the manufacturing of innovative and high quality dry mix mortars and specialty solutions for sustainable and responsible construction, operating 52 manufacturing facilities in 20 countries and 2700 employees around the globe.
The ParexGroup of companies offer a full range of products for new construction or renovation, for façade decoration and protection, all adapted to suit the architectural styles and construction methods of the area. below are some of the products:
Davco K11 Panelflex system is a dual component high performance, multi-layer waterproofing system. It consists of a high adhesion base coat, a reinforcement and a highly flexible, flowable top coat and finish off with a coloured waterproofing coating.
DAVCO K10 GRS 2000 is a liquid applied polyurethane elastomeric seamless waterproofing membrane.DAVCO K10 GRS 2000 contains a specially formulated root resistance additive, which prevent the waterproof membrane from being perforated by vegetation.
SOLARTAC is specially formulated with fine spherical particles that minimizes surface temperature on roof and walls by reflecting a large percentage of the radiant heat energy before it penetrates the building. This lowers interior temperature and reduces energy cost for cooling the building.
DAVCO K10 POLYURETHANE PLUS 453 is a flexible single-pack waterbased polyurethane waterproofing and sealing membrane which is capable of curing in approximately 4-8 hours depending on the number of coats and temperature.
Davco K10 Duraflex is a single pack, water based, high build waterproofing membrane for the sealing and long term protection of exterior surfaces. The coating combines a high degree of flexibility with considerable cohesive strength and water resistance. Davco K10 Duraflex has the ability to absorb considerable substrate movement and to bridge developing cracks.
DAVCO K11 FLEX 226 is used for the protection and waterproofing of rendered concrete and masonry.Technical appraisal approved for contact with potable water • Resistant to micro-cracking up to 2mm • Watertight • Flexible • Pressure and counter pressure resistant.
DAVCO K11 MATRYX is a cementitious waterproofing system which protects and waterproo’ concrete structures by crystallisation. The active chemicals react with moisture in the concrete resulting in crystalline formation within the pores and capillary tracts and concrete, thus waterproofing the structure against penetration of water and other liquids from any direction DAVCO K11 MATRYX gives a strong and lasting waterproofing against dampness and ground water hydrostatic pressure.
DAVCO K11 SLURRY 225 used with DAVCO K11 SLURRY 225 BONDING AGENT reacts with concrete by a crystallization process to form a 2 part permanent slightly flexible waterproofing membrane capable of bridging cracks, to withstand hydrostatic pressure and for use in saturated conditions.
LANKO 224 K11 RAPID PLUG is an ultra-fast setting hydraulic mortar, which offers immediate and long-term protection against water leakage. It hardens within seconds and increases slightly in volume while setting.
731 LANKOREP STRUCTURE is a ready-to-wet mortar composed of sand, special cement, fibres and admixtures, chloride and metal particle free. 731 LANKOREP STRUCTURE protects steel rebars from corrosion.
603 POLYURETHANE is a single-component polyurethane sealant. Easy application on most materials : concrete, stone, brick, roof-tiles, ceramic tiles, aluminium, wood, glass, PVC.
162 FLOW PRIME is a bonding primer which creates a bonding key on smooth and sealed substrates or porous substrates. It improves the condition of the surface, the bonding strength of the mortar and reduces the bubble effect (pin hole), absorption capacity of the substrate.